User's Manual

The steps required to configure the print server to receive print jobs from a

Windows PC running the PrintraNet software are as follows:

1. Select the name of the desired EtherWind print server from the list by double

clicking on it (XAdmin32) or entering its IP address (WebXAdmin).

2. Click on the Internet tab or button.

3. Enter the IP address of the POP3 server (consult your network administrator if

you do not know this address).

4. Enter the mailbox name for the remote EtherWind print server. Usually this

will be the first part of the E-mail address that you entered in step 3 of the

Installing the Software on the Windows PC at the Local Site section (for example,

if the E-mail address of the remote print server is emailprinter@xyz, then the

mailbox name would be emailprinter.

5. Enter the password for the mailbox, if any.

6. The print server is configured by default to poll the POP3 server every 30 sec-

onds. You may change this value, if desired.

7. If you have enabled notification, enter the IP address of your SMTP server

(consult your network administrator if you do not know this address).

8. Press the OK button., and exit XAdmin32. You have now configured the print

server to receive print jobs.

Printing to the Remote TROY Print Server

To print to the remote EtherWind print server from the local Windows PC, you

simply select the printer that you created in Step 1 and print to it the normal

manner. For example, to print the remote printer named Email Printer, you

would select Print from the menu bar, choose the printer named Email Printer,

and then click OK.

At this point, the Port Settings dialog box will appear (you may disable this by