User's Manual

User Manual
Since this module is not sold to general end users directly, there is no user manual of
module.
For the details about this module, please refer to the specification sheet of module.
This module should be installed in the host device according to the interface specification
(installation procedure).
This radio transmitter SX-SDMAN identify the device by certification number or
model number if Category II) has been approved by Industry Canada to operate with
the antenna types listed below with the maximum permissible gain indicated.
Antenna types not included in this list, having a gain greater than the maximum gain
indicated for that type, are strictly prohibited for use with this device.
Antenna Type
Antenna Gain
2.4GHz W52/53/58
Embedded Antenna 2.0dBi 2.5dBi
For Bluetooth and Wireless LAN
For Mobile use only
Sleeve antenna 1.0dBi 1.1dBi For Wireless LAN
Mini-Nanoblade antenna(*) 2.5dBi 4.8dBi
For Wireless LAN
For Mobile use only
Stand Alone antenna(*) 3.0dBi 4.6dBi
For Wireless LAN
For Mobile use only
Le présent émetteur radio SX-SDMAN a été approuvé par Industrie Canada pour
fonctionner avec les types d'antenne énumérés ci dessous et ayant un gain
admissible maximal. Les types d'antenne non inclus dans cette liste, et dont le gain
est supérieur au gain maximal indiqué, sont strictement interdits pour l'exploitation
de l'émetteur.
Type d’antenne
Gain
2.4GHz W52/53/58
Embedded Antenna 2.0dBi 2.5dBi
For Bluetooth and Wireless LAN
For Mobile use only
Sleeve antenna 1.0dBi 1.1dBi For Wireless LAN
Mini-Nanoblade antenna(*) 2.5dBi 4.8dBi
For Wireless LAN
For Mobile use only
Stand Alone antenna(*) 3.0dBi 4.6dBi
For Wireless LAN
For Mobile use only
(*)It has not been confirmed to meet new rules of FCC 14-30 and RSS-247 in a state of attaching
these antennas. Therefore, the testing and the class 2 permissive change application are
required before using these antennas.

Summary of content (5 pages)