Specifications

6-1Using LAN board in NetWare

SATO Users Manual

6. Using LAN board in NetWare

This chapter explains how to configure LAN board and NetWare server to print from NetWare

environment.

-Make sure the Novell client software has already been installed on the client and

NetWare server is on the network.

-Make sure to install printer driver before you start using LAN board.

-NetWare server can be configured by either silex configuration utility (Quick Setup or

AdminManager) or Novell utility, PCONSOLE.

-When configuring by AdminManager, refer to Chapter 7.

In case of initial installation and printing In case of printing

(Administrator) (Client)

TIP

NOTE

Configure printer port

Configure using Quick Setup

Configure printer port