Specifications

6-6Using LAN board in NetWare
SATO Users Manual
Configure NetWare.
.
Select the operation mode of the NetWare server.
Select the file server to create a print queue.
.
-The next screen to be displayed vary depending on NetWare server selected.
NetWare 3 or below will go to ->10 (A)
NetWare 4 or above will go to ->10 (B)
-When NetWare 4 or above file server is selected, print server mode will be automatically selected.
7.
8.
Click Next.
Click Next.
Click Next.
Select the file server.
9.
Select Bindery mode.
Click Yes.
TIP