Specifications

7-4Functions for Configuration
SATO Users Manual
On the AdminManager menu bar, select
Settings , then Set IP address to start IP
address configuration tool.
Before setting up LAN board, verify that it can be discovered by AdminManager. If not, select
Settings, then assign an IP address.
Assigning an IP address
Assign an IP address manually.
-Before assigning an IP address, verify LAN board Ethernet address. The address can be
found on the self-diagnostic print sheet. (e.g. 00:80:92:34:c0:19)
1.
2.
Searching LAN board Using AdminManager
To validate the IP address, reset LAN
board.
-Restart process of AdminManager may not work depending on printer type.
In that case, switch off and on the printer power.
3.
Enter Ethernet address and IP address
of LAN board to be configured.
Click OK.
NOTE
TIP