Specifications

7-11Functions for Configuration
SATO Users Manual
Tab
TabTab
Tab Explanation
ExplanationExplanation
Explanation
Factory
FactoryFactory
Factory
Default
DefaultDefault
Default
Setting the default gateway address. The default
gateway address must be 4 numbers, each
between 0-255 (eg. 192.168.100.240). If you use a
gateway, the gateway must be in the same
segment as the print server. However, entering
0.0.0.0 would not be valid.
0.0.0.0
You can select to use a banner page when
printing with LPR and FTP. (A banner page is
print cover page with print job explanations.)
DISABLE
Primary Server Setting the DNS server (primary) address. When
SMTP server name is configured directly at IP
address, the DNS server's setting is not
necessary.
0.0.0.0
Secondary Server Setting the DNS server (secondary) address.
When SMTP server name is configured directly
at IP address, the DNS server's setting is not
necessary. The values must be 4 numbers, each
between 0-255 (eg. 192.168.100.10).
0.0.0.0
Primary Server Setting the WINS server (primary) address.
WINS server will resolve the IP address from the
host name. Therefore you can use a hostname
instead of the IP address when printing. The
values must be 4 numbers, each between 0-255
(eg. 192.168.100.10).
0.0.0.0
Secondary Server Setting the WINS server (secondary) address.
WINS server will resolve the IP address from the
host name. Therefore you can use a hostname
instead of the IP address when printing. The
values must be 4 numbers, each between 0-255
(eg. 192.168.100.10).
0.0.0.0
Scope ID The scoop ID defines the computer group that
recognized the registered host name. -
TCP/IP
Item
ItemItem
Item
DNS Server
Default Gateway
WINS Server
Use FTP/LPD Banner