Specifications

7-13Functions for Configuration
SATO Users Manual
Tab
TabTab
Tab
Factory
FactoryFactory
Factory
Default
DefaultDefault
Default
ENABLE
PRxxxxxx
(Lower 6 digits
of Ethernet
address)
802.2
Print server
NetWare File
Server to be
connected
Set the name of the file server primarily
connected to. The print server logs into
the file server set here when operating in
PSERVER mode. The print server
searches the file server automatically and
logs in if the value is blank.
-
Login
Password
Set the password that is authenticated
when the print server logs into the file
server as a PSERVER mode. When the
password is set for the print server, the
same password must be set to the
corresponding file server. If the print
server is connected to two or more file
servers, the same password must be set to
all the file servers.
-
Job Polling
Interval
Set the interval for the print server to
query the file server for jobs in units of
seconds. Usually the value should be the
default.
4
Enable/Disable NetWare protocol.
Item
ItemItem
Item
B
i
n
d
e
r
y
S
e
t
u
p
Explanation
ExplanationExplanation
Explanation
Send the job via NetWare
Use NetWare
Protocol
Print Server Name
Frame Type
Specify the print server name for the print server when
starting in PSERVER mode. Because this configuration is used
as the identifier on the network in the NetWare protocol, the
print server name set must be different from other names in
the NetWare environment. It is used as a login name in
connecting to the NetWare server.
Select the default frame type of the print server. If the set
frame type does not work, it will be changed to a different
frame type automatically.
Select the primary operation mode (PSERVER mode /
RPRINTER mode) of the print server. If the set mode does not
work, the print server starts in a different mode.
Printing method
NetWare
PSERVER