Specifications

7-14Functions for Configuration
SATO Users Manual
Tab
TabTab
Tab
Factory
FactoryFactory
Factory
Default
DefaultDefault
Default
NetWare
Print Server
to be
connected
Set the name of the print server primarily
connected to. This product connects to the
print server set here when operating in
RPRINTER mode. This product searches
print server automatically and connects if
the value is blank.
-
Job Timeout Set the timeout value (in units of seconds)
for the print server to determine the end
of the job when operating in RPRINTER
mode. Usually the value should be the
default.
10
PRxxxxxx-Prn1
(Lower 6 digits
of Ethernet
address)
Job management can be performed via NetWare server.
RPRINTER
Set the printer name under print server information within
the NetWare server. It must be the same as the "Printer
Name" registered in the NetWare server.
Printer Name
R
P
R
I
N
T
E
R
S
e
t
u
p
Explanation
ExplanationExplanation
ExplanationItem
ItemItem
Item
NetWare
Printing Method