Specifications

7-16Functions for Configuration
SATO Users Manual
SNMP Configuration
Tab
TabTab
Tab Explanation
ExplanationExplanation
Explanation
Factory
FactoryFactory
Factory
Default
DefaultDefault
Default
Specify the authentication community name of
SNMP. This community name is authenticated
when an SNMP set request is received.
public
Specify the trap community of SNMP. This
community name is used when the print server send
a trap.
public
Specify the destination IP address of the SNMP trap.
The value is a four-part series of numbers separated
by decimal points, such as "xxx.xxx.xxx.xxx". When
the value is "0.0.0.0"(default), this item is disabled
and a trap will not be generated in any case.
0.0.0.0
SysContact Specify the SysContact of the MIB-II object. The e-
mail address of the network administrator is used.
-
SysName Specify the SysName of the MIB-II object. The host
name or domain name of the print server is used.
-
SysLocation Specify the SysLocation of the MIB-II object. The
location of the print server is used.
-
Enable Authen
Trap
Select whether to allow or disallow the
"EnableAuthenTrap" of the MIB-II object. If a
violation of the community occurs "allow" is the
setting, the SNMP trap is sent to the IP address
specified in "TRAP Address".
ENABLE
Item
ItemItem
Item
SNMP
MIB-II Parameters
Authentication
community
Trap Community
Trap Destination
Address