Specifications

7-17Functions for Configuration
SATO Users Manual
SMTP Configuration
Tab
TabTab
Tab Explanation
ExplanationExplanation
Explanation
Factory
FactoryFactory
Factory
Default
DefaultDefault
Default
Enable/Disable SMTP protocol operations. If
"Disable" is selected, e-mail "send" function is
not available.
DISABLE
Setting SMTP server host name. Entering
domain name or IP address as host name. If a
domain name is used, it is necessary to
configure the DNS server.
-
Setting the sender address (From Address).
Usually the mail address of the network
administrator is set.
-
Setting mail destination address (To Address).
-
Mail is sent while the printer is off line.
OFF
Mail is sent when the printer is out of paper.
OFF
Mail is sent when abnormal conditions are
encountered in the printer.
OFF
In regular intervals the existence of events is
checked. This interval is defined in minutes. If
more than one event occurs within this
interval, a bundled report is sent.
10
Setting the SMTP port number. It is
recommend to use the default value (=25).
25
Specify the signature string to be added at the
end of an e-mail.
---------------
SATO XXXXX
[00:80:92:XX:XX:XX]
---------------
(Name of SATO and
lower 6 digits of
Ethernet address)
Item
ItemItem
Item
Use SMTP Protocol
SMTP Server Name
From Address
SMTP
Check Interval
SMTP Port
Number
Signature
Offline
Paper out
Printer error
Advanced Setup Event to Address
To Address
(1-2)