Specifications

7-18Functions for Configuration
SATO Users Manual
PrinterPort Configuration
Tab
TabTab
Tab Explanation
ExplanationExplanation
Explanation
Factory
FactoryFactory
Factory
Default
DefaultDefault
Default
lp Port
BOJ String Specify the string to be transmitted to the printer before
output to the direct output port (lp port). Specify the
string when a control code, etc. needs to be sent before
printing.
-
EOJ String Specify the string to be transmitted to the printer after
output to the direct output port (lp port). Specify the
string when a control code, etc. needs to be sent after
printing.
-
BOJ String Specify the string to be transmitted to the printer before
output to the port via a Kanji filter (sjis/euc). Specify the
string when a control code, etc. needs to be sent before
printing. (Kanji - double sized character for Japanese)
-
EOJ String Specify the string to be transmitted to the printer after
output to the port via a Kanji filter (sjis/euc). Specify the
string when a control code, etc. needs to be sent after
printing. (Kanji - double sized character for Japanese)
-
Printer
Emulation
Configure to correspond with the PDL(Printer Description
Language). The printing data will be converted to a code
that corresponds to the printer emulation in outputting to
the output port via Kanji filter (sjis/euc). (Kanji - double
sized character for Japanese)
ASCII
Tab Size Specify the number of characters to convert the tab code
(0x09) to half size (single-byte) space (0x20) in outputting
via a Kanji filter. When the value is 0, the tab is not
converted. The value is from 0 to 16. (Kanji - double sized
character for Japanese)
8
Printer Port
Item
ItemItem
Item
euc/sjis Port