Specifications

7-30Functions for Configuration
SATO Users Manual
Web browser/TELNET configuration items
Print server function
General
TCP/IP
Web browser
Web browserWeb browser
Web browser TELNET
TELNETTELNET
TELNET
TCP/IP
Protocol
TCP/IP
Protocol
Enable/Disable TCP/IP protocol operations.
This has influence on the configuration of
Setup Tools, LPR, FTP, TELNET, SNMP,
HTTP and other protocols over TCP/IP.
ENABLE
DHCP/BOOTP DHCP/BOOTP Enable/Disable DHCP/BOOTP protocol
operations. DHCP/BOOTP is a protocol, via
which IP address gets assigned by the BOOTP
server or DHCP server. If you use
DHCP/BOOTP server, the DHCP/BOOTP
server must be in the same segment as the
print server. This print server detects DHCP
and BOOTP automatically. If more than 1
address get returned, the IP address which is
returned first will be used.
ENABLE
RARP RARP Enable/Disable RARP protocol operations.
RARP is a protocol, via which IP address gets
assigned by the RARP server. If you use RARP
server, the RARP server must be in the same
segment as the print server.
ENABLE
TCP/IP
Item
ItemItem
Item
Explanation
ExplanationExplanation
Explanation
Facory
FacoryFacory
Facory
Default
DefaultDefault
Default
Web browser
Web browserWeb browser
Web browser TELNET
TELNETTELNET
TELNET
Change root
Password
Change root
Password
Please enter the password.(in ASCII TEXT)
This password will be used for configuration
changes via Telnet, Web page and Setup Tools.
-
Use HP
JetAdmin
Use HP
JetAdmin
Please select whether you want to use
HEWLETT PACKARD's
JetAdmin/WebJetAdmin.
DISABLE
Factory
FactoryFactory
Factory
Default
DefaultDefault
Default
Explanation
ExplanationExplanation
Explanation
Item
ItemItem
Item
General