Specifications

7-31Functions for Configuration
SATO Users Manual
Web browser
Web browserWeb browser
Web browser TELNET
TELNETTELNET
TELNET
IP Address IP Address Setting the Print Server IP address. The IP
address must be 4 numbers, each between 0-
255 (eg. 192.168.100.10).
0.0.0.0
Subnet Mask Subnet Mask Setting the print server subnet mask. The
subnet mask must be 4 numbers, each between
0-255 (eg. 255.255.255.0). However, entering
0.0.0.0 would not be valid, and the subnet
mask corresponding to the IP address would be
used automatically.
0.0.0.0
Default
Gateway
Default
Gateway
Setting the default gateway address. The
default gateway address must be 4 numbers,
each between 0-255 (eg. 192.168.100.240). If
you use a gateway, the gateway must be in the
same segment as the print server. However,
entering 0.0.0.0 would not be valid.
0.0.0.0
Use FTP/LPD
Banner
Use FTP/LPD
Banner
You can select to use a banner page when
printing with LPR and FTP. (A banner page is
print cover page with print job explanations.)
DISABLE
Primary Server Primary Server Setting the DNS server (primary) address.
When /SMTP server name is configured
directly at IP address, the DNS server's setting
is not necessary.
0.0.0.0
Secondary
Server
Secondary
Server
Setting the DNS server (secondary) address.
When SMTP server name is configured directly
at IP address, the DNS server's setting is not
necessary. The values must be 4 numbers,
each between 0-255 (eg. 192.168.100.10).
0.0.0.0
Primary Server Primary Server Setting the WINS server (primary) address.
WINS server will resolve the IP address from
the host name. Therefore you can use a
hostname instead of the IP address when
printing. The values must be 4 numbers, each
between 0-255 (eg. 192.168.100.10).
0.0.0.0
Secondary
Server
Secondary
Server
Setting the WINS server (secondary) address.
WINS server will resolve the IP address from
the host name. Therefore you can use a
hostname instead of the IP address when
printing. The values must be 4 numbers, each
between 0-255 (eg. 192.168.100.10).
0.0.0.0
Scope ID Scope ID The scoop ID defines the computer group that
recognized the registered host name.
-
Factory
FactoryFactory
Factory
Default
DefaultDefault
Default
DNS Config
WINS Config
Item
ItemItem
Item
TCP/IP
Explanation
ExplanationExplanation
Explanation