Specifications

7-32Functions for Configuration
SATO Users Manual
NetWare
TELNET
TELNETTELNET
TELNET
NetWare
Protocol
Enable/Disable NetWare protocol.
ENABLE
Frame Type Select the default frame type of the print server. If
the set frame type does not work, it will be
changed to a different frame type automatically.
802.2
Operation
Mode
Select the primary operation mode (PSERVER
mode / RPRINTER mode) of the print server. If the
set mode does not work, the print server starts in a
different mode.
PSERVER
Printer Name Set the printer name under print server
information within the NetWare server. It must be
the same as the "Printer Name" registered in the
NetWare server.
PRxxxxxx-Prn1
(Lower 6 digits
of Ethernet
address)
Print Server
Name
Specify the print server name for the print server
when starting in PSERVER mode. Because this
configuration is used as the identifier on the
network in the NetWare protocol, the print server
name set must be different from other names in
the NetWare environment. It is used as a login
name in connecting to the NetWare server.
PRxxxxxx
(Lower 6 digits
of Ethernet
address)
Web browser
Web browserWeb browser
Web browser
Operation Mode
NetWare
Protocol
Frame Type
Print Server
Name
PSERVER Config
Explanation
ExplanationExplanation
Explanation
Factory
FactoryFactory
Factory
Default
DefaultDefault
Default
Net Ware
Printer Name
Send the job via NetWare