Specifications

7-33Functions for Configuration
SATO Users Manual
TELNET
TELNETTELNET
TELNET
Login
Password
Set the password that is authenticated when the
print server logs into the file server as a PSERVER
mode. When the password is set for the print
server, the same password must be set to the
corresponding file server. If the print server is
connected to two or more file servers, the same
password must be set to all the file servers.
-
Job Polling
(sec.)
Set the interval for the print server to query the
file server for jobs in units of seconds. Usually the
value should be the default.
4
FSERVER
Name (1-8)
Set the name of the file server primarily connected
to. The print server logs into the file server set
here when operating in PSERVER mode. The print
server searches the file server automatically and
logs in if the value is blank.
-
PSERVER
Name (1-8)
Set the name of the print server primarily
connected to. This product connects to the print
server set here when operating in RPRINTER
mode. This product searches print server
automatically and connects if the value is blank.
-
Job Timeout
(sec.)
Set the timeout value (in units of seconds) for the
print server to determine the end of the job when
operating in RPRINTER mode. Usually the value
should be the default.
10
Job
Timeout(sec.)
Login Password
Job Polling
(sec.)
PSERVER
Name
(1-8)
Job management can be performed via NetWare server.
RPRINTER Config
FSERVER
Name
(1-8)
Net Ware
Item
ItemItem
Item
Explanation
ExplanationExplanation
Explanation
Factory
FactoryFactory
Factory
Default
DefaultDefault
Default
Web browser
Web browserWeb browser
Web browser