Specifications

7-35Functions for Configuration
SATO Users Manual
SNMP
Web browser
Web browserWeb browser
Web browser TELNET
TELNETTELNET
TELNET
Authentic
Community
Authentic
Community
Specify the authentication community name of
SNMP. This community name is authenticated
when an SNMP set request is received.
public
Trap
Community
Trap
Community
Specify the trap community of SNMP. This
community name is used when the print server
send a trap.
public
Trap
Address(IP)
Trap
Address(IP)
Specify the destination IP address of the SNMP
trap. The value is a four-part series of numbers
separated by decimal points, such as
"xxx.xxx.xxx.xxx". When the value is
"0.0.0.0"(default), this item is disabled and a trap
will not be generated in any case.
0.0.0.0
SysContact SysContact Specify the SysContact of the MIB-II object. The e-
mail address of the network administrator is
used.
-
SysName SysName Specify the SysName of the MIB-II object. The
host name or domain name of the print server is
used.
-
SysLocation SysLocation Specify the SysLocation of the MIB-II object. The
location of the print server is used.
-
EnableAuthenT
rap
EnableAuthenT
rap
Select whether to allow or disallow the
"EnableAuthenTrap" of the MIB-II object. If a
violation of the community occurs "allow" is the
setting, the SNMP trap is sent to the IP address
specified in "TRAP Address".
2
Factory
FactoryFactory
Factory
Default
DefaultDefault
Default
SNMP
Item
ItemItem
Item
Explanation
ExplanationExplanation
Explanation