Specifications

7-37Functions for Configuration
SATO Users Manual
E-Mail (SMTP)
TELNET
TELNETTELNET
TELNET
SMTP Protocol Enable/Disable SMTP protocol operations.
If "Disable" is selected, e-mail "send"
function is not available.
DISABLE
SMTP Server
Name
Setting SMTP server host name.
Entering domain name or IP address as
host name. If a domain name is used, it is
necessary to configure the DNS server.
-
SMTP Port
Number
Setting the SMTP port number. It is
recommend to use the default value (=25).
25
From Address Setting the sender address (From
Address). Usually the mail address of the
network administrator is set.
-
Signature Line
(1-4)
Specify the signature string to be added
at the end of an e-mail.
---------------
SATO XXXXX
[00:80:92:XX:XX:XX]
---------------
(Name of SATO and
lower 6 digits of
Ethernet address)
-
To
address
To Address Setting mail destination address (To
Address).
-
Check
Interval
(min.)
Check Interval
(min.)
In regular intervals the existence of
events is checked. This interval is defined
in minutes. If more than one event occurs
within this interval, a bundled report is
sent.
10
Offline Offline Mail is sent while the printer is off line.
OFF
Paper
Empty
Paper Empty Mail is sent when the printer is out of
paper.
OFF
Fault Fault Mail is sent when abnormal conditions
are encountered in the printer.
OFF
Send Address (1-2)
Explanation
ExplanationExplanation
Explanation
Factory
FactoryFactory
Factory
Default
DefaultDefault
Default
E-Mail (send)
Item
ItemItem
Item
Web browser
Web browserWeb browser
Web browser
Signature Line
(1-8)
SMTP Protocol
SMTP Server
Name
SMTP Port
Number
From Address