Specifications

8-7Questions & Answers
SATO Users Manual
When the PC and LAN board are not on the same segment, a subnet mask and lately
address must be configured on LAN board. Using AdminManager or LAN board web
page to verify that subnet mask and gateway address are correctly configured.
SOLUTION1
SOLUTION2
If DHCP/BOOTP server or RARP server resides on the network, the IP addresses are
assigned automatically, which may rewrite the IP address that you have manually
assigned to LAN board. To avoid this problem, tick off Use DHCP/BOOTP check box
and configure the IP address again.
Error during printing
Dial-up connection box appears when printing job is executed.
CHECK
If you try to print while other users are printing large data (e.g. many pages or color
pages with high resolution), the printer is unable to accept your print job until the
ongoing print is finished. If the waiting time of your print job exceeds a certain limit,
a time out occurs, which causes the error message. In such case, execute the
print job again afterwards.
CHECK
Printing will be complete after you cancel this dial box to shift the process to LAN
adapter from the dial-up adapter. This problem is caused due to Windows specifications.