Specifications

8-9Questions & Answers
SATO Users Manual
Problems in NetWare
LAN board can not establish the connection with NetWare
From the AdminManager or the LAN board Web page, verify the proper configuration
for "Frame Type", "Mode".
-The automatic changeover of NetWare operation mode on LAN board may require some
time depending on the operating environment.
When two or more LAN boards are used, make sure that the same printer name (NetWare
printer name) is not duplicated.
LAN board can not establish the connection with NetWare server (RPRINTER
mode)
Click Print server , then Printer list, then Current status on NetWare server to verify if
the LAN board is operating properly.
Make sure that the Print Server Name specified on the LAN board is the same as that
of the print server operating on your file server.
NOTE
CHECK1
CHECK2
CHECK1
CHECK2