Specifications

1-5About LAN board
SATO Users Manual
Dip Switch Operation
-Make sure to switch off printer when operating dip switches.
-Diagnostic/configuration report can not be printed depending on your printer.
<Initialization/Reset to factory default>
1. Switch off printer.
2. Switch on the dip switch No. 2.
3. Switch on printer and wait until the printer is ready for printing.
4. Switch off printer.
5. Switch off the dip switch No. 2.
<Configuration report>
1. Switch off printer.
2. Switch on the dip switch No. 3.
3. Switch on printer and wait until configuration report is printed.
4. Switch off printer.
5. Switch off the dip switch No. 3.
TIP
<Diagnostic report>
1. Switch off printer.
2. Switch on the dip switch No. 4.
3. Switch on printer and wait until diagnostic report is printed.
4. Switch off printer.
5. Switch off the dip switch No. 4.