Specifications

1-7About LAN board
SATO Users Manual
Switch off the printer after you make sure
the power supply is not connected to LAN
board.
Connect the network cable to the network
port of LAN board.
Connect the other end of the network
cable to the Ethernet HUB.
Switch on the printer. Check for the
printer proper function.
2.
3.
1.
4.
Connect LAN board to the Network
The following items are required to connect LAN board to the network.
TIP
-Prepare 100BASE supported Ethernet HUB and network cable (category 5 or above).
Ethernet HUB
Network Cable