Specifications

3-15Using LAN board in Windows 95/98/Me
SATO Users Manual
1.
2.
3.
Adding ST-Print2003 Raw (9100) Port
Select Raw mode.
Select Print with Raw mode (TCP/IP
9100).
Click Next.
Type in print port name.
Click Next .
Click Next.
-To verify if the specified print server can access 9100 port, click Next.
Display the list of print servers on the network by clicking Searching Print Server Select
LAN board you want to configure.
NOTE
If there is no problem, use the default
printer port name (RAW_IP address).