Specifications

4-1
SATO Users Manual
Using LAN board in Windows NT 4.0, Windows 2000 and Windows XP
4. Using LAN board in Windows NT 4.0,
Windows 2000 and Windows XP
Print Using TCP/IP of Windows NT 4.0, Windows
2000 and Windows XP.
Following indicates how to print using TCP/IP protocol.
This chapter explains how to print using TCP/IP, NetBEUI and NetBIOS over TCP/IP protocol
of Windows NT 4.0, Windows 2000 and Windows XP.
In case of initial installation
and printing
Verify the PC network configuration
In case of printing
Configure IP address using QuickSetup
Install ST-Print2003
Configure printer port
NOTE
-Make sure to install printer driver before you start using LAN board.
-For the print using embedded printing client function, refer to "Print Using Embedded Printing
Client Function" in this chapter.