Specifications

Users Manual SX
SATO Users Manual
Notice:
If LAN board has been exposed to cold temperature, allow it to warm to room temperature
before turning on. This will prevent the occurrence of harmful condensation within the device
(this is a particularly important concern when the device is being used in cold climates).
Avoid using LAN board in dusty areas since dust particles can affect the reliability of LAN
board. Contact the dealer of silex technology products if your device has become contaminated
with dust or dirt particles.
4. PROPER TREATMENT OF THE DEVICE
Warning:
To avoid any risk of short-circuit, fire or other internal damage, never allow any metal
objects such as screws or paper clips to fall into the device. If that should happen,
immediately turn off the power and unplug the power cord. Contact the dealer of silex
technology products for appropriate assistance. To avoid damage to LAN board, never
allow any liquids to spill into any part of LAN board, and never expose LAN board
to rain or water. If any of these events should occur, turn off LAN board immediately.
Contact the dealer of silex technology, Inc. products for assistance before attempting to
use LAN board again. To prevent computer malfunction or equipment damage, never
place LAN board on top of (or adjacent to) a heating device, and never expose it in
direct sunlight. Never store LAN board in a locked and unventilated vehicle, (where
excessive internal temperatures may be encountered). Always unplug the power cord
during lightning storms in order to protect the device from possible damage as a result of a
power surge. If LAN board is ever dropped and damaged, or if you ever detect the
emission of an extraordinary odor or excessive heat, unplug the power cord and turn off
the printer and LAN board immediately. Contact the dealer of silex technology, Inc.
products for appropriate assistance.