Specifications

4-26
SATO Users Manual
Using LAN board in Windows NT 4.0, Windows 2000 and Windows XP
Print Using NetBEUI, NetBIOS over TCP/IP of Windows 2000
NOTE
Follow the steps shown below to print from Windows 2000 using NetBEUI, NetBIOS over
TCP/IP protocol.
1.
2.
3.
NOTE
Verify Network Configuration
Click Start, then Settings , then Control Panel, then Network and Internet Connection.
Open Properties of Local area connection.
Verify NetBEUI protocol is added.
-If NetBEUI is not in the component list, click Install , then Protocol , then NetBEUI protocol .
Make sure that NetBEUI protocol and Microsoft network shared service are added to the
Network of the Windows 2000.
4.
Verify that Microsoft Network Client is added.
-If Microsoft Network Client is not in component list, click Install, then Client, then Microsoft
Network Client.
NOTE
Verify the PC network configuration
Build NetBEUI, NetBIOS over TCP/IP printing environment
- Make sure to install printer driver before you start using LAN board.
- For further information on NetBEUI, NetBIOS over TCP/IP configuration, refer to Chapter 7.