Specifications

4-27
SATO Users Manual
Using LAN board in Windows NT 4.0, Windows 2000 and Windows XP
Verify the PC Network Configuration (NetBIOS over TCP/IP)
Make sure that Internet Protocol (TCP/IP) and Microsoft Network Sharing Service are
added to Network of Windows NT 4.0 and verify if NetBIOS is configured to Internet Protocol
(TCP/IP).
3.
2.
Click Start , then Settings , then Control Panel , then Network and Dial-up Connection.
Right-click Local Area Connection , then click properties.
Verify Microsoft Network Sharing Services is added.
NOTE
-If Microsoft Network Sharing Services is not in the list, click Install, then Client, then Microsoft
Network Sharing Services.
4.
Verify Internet Protocol (TCP/IP) is added.
NOTE
-If Internet Protocol (TCP/IP) is not in Components checked are used by this connection,
click Install, then Internet Protocol (TCP/IP) to add Internet Protocol (TCP/IP).
1.
5.
Verify Enable NetBIOS over TCP/IP is selected by clicking Internet Protocol (TCP/IP) ,
then
Properties , then Details , then WINS.