User Manual

Uploading Images
Operating the WT-4 for FTP146
3 Turn off the WT-4 power.
When the POWER LED (pg.3) changes
from green to yellow and then goes
out, detach the USB cable.
• To change the destination folder, use
the Setup Utility (pg.50, 126).
❏ Interrupting Transmission
To cancel transmission of images marked with a white “send” icon
or green “sending” icon, select the images during playback and
press the center of the multi selector while pressing the N button
(D3) or the J button (D300). The icon will be removed. Any of the
following actions will also interrupt transmission:
• Turning the camera or WT-4 off
• Selecting [Yes] for [Wireless transmitter] > [Transfer
settings] > [Deselect all]
D During Upload
Do not remove the memory card or disconnect the Ethernet cable during
upload.
D File Names
• To prevent files from being overwritten during transfer, select [On] for
the [File No. Sequence] option in the camera Custom Settings menu
before shooting.
• If the same FTP server is set as the transfer destination for multiple
cameras, we recommend that separate storage folders be set for each
camera.
A Voice Memos
Voice memos can not be uploaded separately, but will be included when
associated pictures are transmitted. Voice recordings can not be selected
for upload.
$00_WT-4_En.book Page 146 Friday, August 10, 2007 2:02 PM