User Manual

153
Mode / FTP Registration (for Connection to ftp Servers Only)
Menu Guide
FTP Registration (for Connection to ftp
Servers Only)
In transfer mode, ftp profiles can be created without using the
WT-4 Setup Utility. See the Appendix for more information
(pg.175). This option is only available when the WT-4 and computer
are connected with a USB cable and the WT-4 is on.
Editing ftp Profiles
To edit an ftp server profile, highlight it in the
profile list in transfer mode and press the N
button. Choose the settings to be edited
from [Wireless], [TCP/IP], and [FTP], or select
[Done] to save changes and return to the
profile list. Only ftp server profiles can be
edited in this fashion; to edit other profiles,
use the WT-4 Setup Utility. This option is only available when the
WT-4 and computer are connected with a USB cable and the WT-4
is on.
A Text Entr y
The following dialog is displayed when text entry is required.
Use the multi selector to highlight the desired character in the keyboard
area and press the center of the multi selector to insert the highlighted
character at the current cursor position (note that if a character is entered
when the field is full, the last character in the field will be deleted). To
delete the character under the cursor, press the O button. To move the
cursor to a new position, press the N button while using the multi
selector.
To complete entry and return to the previous menu, press the G button.
To exit to the previous menu without completing text entry, press G.
Keyboard area: Use multi
selector to highlight
letters, press center to
select.
Text display area: Text
appears in this area. To
move cursor, press N
while using up, down,
left, and right buttons
on multi selector.
$00_WT-4_En.book Page 153 Friday, August 10, 2007 2:02 PM