User Manual

178
Troubleshooting
Appendices
Troubleshooting
Problem Solution Page
“POWER” LED does
not light.
• Turn the WT-4 on.
• Confirm that the battery is inserted
and fully charged.
pg.71, 82, 91,
103, 141
pg.8, 172
[Wireless
transmitter] option
not available.
• Select [MTP/PTP] for [USB] option in
camera setup menu.
• Confirm that the connection
between the WT-4 and camera and
turn the WT-4 on.
pg.7
pg.70, 81, 90,
102, 140
The [Print], [Device
info], and [Device
settings] menus
cannot be
selected.
• Confirm that the connection
between the WT-4 and camera and
turn the WT-4 on.
pg.70, 81, 90,
102, 140
Excessive radio
interference.
Change orientation of antenna. —
All LEDs blink at
once.
WT-4 hardware or battery
malfunction. Contact a Nikon-
authorized service representative.
—
Camera displays
TCP/IP or FTP error.
• Check settings for host and/or
wireless LAN adapter and adjust
camera settings appropriately.
• Check firewall settings.
pg.54, 65,
123, 134, 153
pg.5
Camera displays
wireless error.
• Confirm that host and wireless LAN
adapter are on.
• Ensure that there are no obstacles
between WT-4 and wireless LAN
adapter.
• Check settings for host and/or
wireless LAN adapter and adjust
camera settings appropriately.
—
—
pg.54, 65,
123, 134, 153
Camera displays
“Ethernet cable is
not connected”.
Connect Ethernet cable or change
interface setting to [Wireless &
Ethernet].
pg.51, 62,
121, 131, 177
$00_WT-4_En.book Page 178 Friday, August 10, 2007 2:02 PM