User Manual

75
Upload pictures to a host computer / Uploading Images
Operating the WT-4 for Computer
3 Turn off the WT-4.
When the POWER LED (pg.3) changes
from green to yellow and then goes
out, detach the USB cable.
• When the connection between the
WT-4 and computer is terminated, the
folder to which images were
transferred automatically opens.
• To change the destination folder, use
the Setup Utility (pg.50).
❏ Interrupting Transmission
To cancel transmission of images marked with a white “send” icon
or green “sending” icon, select the images during playback and
press the center of the multi selector while pressing the N button
(D3) or the J button (D300). The icon will be removed. Any of the
following actions will also interrupt transmission:
• Turning the camera or WT-4 off
• Selecting [Yes] for [Wireless transmitter] > [Transfer
settings] > [Deselect all]
D During Upload
Do not remove the memory card or disconnect the Ethernet cable during
upload.
A Voice Memos
Voice memos can not be uploaded separately, but will be included when
associated pictures are transmitted. Voice recordings can not be selected
for upload.
A Loss of Signal
Transmission may be interrupted if the signal is lost (pg.76). Transmission
can be resumed by turning the WT-4 off and then on again.
A Turning the Camera Off
“Send” marking will be saved if the camera or WT-4 is turned off while
transmission is in progress. Transmission of images marked with a “send”
icon will resume when the camera or WT-4 is turned on.
$00_WT-4_En.book Page 75 Friday, August 10, 2007 2:02 PM