User Manual

Copying Network Profiles to the Camera / Infrastructure Networks

Operating the WT-4 for Computer

Select [Obtain IP address automatically] and click [Next].

• Obtain IP address automatically: Select this option if the network

is configured to supply IP addresses automatically. If the

network does not include a DHCP server, addresses will be

supplied by Auto IP (pg.180).

• IP address: If the network is configured for manual IP

addressing, enter an IP address for the WT-4.

• Subnet mask: If the network is configured for manual IP

addressing, enter a subnet mask for the WT-4.

• Default gateway: If the network requires a gateway address,

select this option and enter the address supplied by the

network administrator. This option applies only if [FTP

server] is selected for Profile type in Step 7.

• DNS server: If a Domain Name Server exists on the network,

select this option and enter the address supplied by the

network administrator. This option applies only if [FTP

server] is selected for Profile type in Step 7.

A Configuring the IP Address

If a DHCP server exists within the network, select [Obtain IP address

automatically]. If a DHCP server does not exist within the network,

deselect [Obtain IP address automatically] (remove the check mark), and

enter an IP address different from the IP address configured for your

computer or wireless LAN access point.

$00_WT-4_En.book Page 67 Friday, August 10, 2007 2:02 PM