User Manual

102
Print Mode / Printing Pictures
Operating the WT-4 for Computer
Printing Pictures
Before connecting the WT-4, select [MTP/PTP] for the [USB] option
in the camera setup menu (pg.7) and confirm that the host
computer is running and that the printer is on.
1 Turn the camera off and insert the
memory card containing the pictures to
be sent.
• If there are multiple card slots, insert
the card into any slot.
To access the network via Ethernet, connect the Ethernet
cable (pg.2). Note that wireless transfer is disabled while an
Ethernet cable is connected. Disconnect the Ethernet cable
before accessing a wireless network. Turn the WT-4 off before
connecting or disconnecting the Ethernet cable.
2 Open the WT-4 USB connector cover and
connect the USB cable from the WT-4 to
the camera USB connector.
3 Turn the camera on.
4 Select [Print mode] for the [Wireless
transmitter] > [Mode] option in the
camera setup menu (pg.152).
DUMMY
Front
U
MMY
$00_WT-4_En.book Page 102 Friday, August 10, 2007 2:02 PM