User Manual

104
Print Mode / Printing Pictures
Operating the WT-4 for Computer
9 Turn off the WT-4
When the POWER LED (pg.3) changes
from green to yellow and then goes
out, detach the USB cable.
A Restrictions to Print Mode
• RAW images or TIFF images cannot be printed using the WT-4 print
mode. To print RAW images and TIFF images, first send them to your
computer, then print them using the ViewNX software supplied with
your camera or other separately-sold software such as Capture NX.
• The Index print function cannot be used.
• The playback screen will not appear even if the camera’s K button is
pressed.
A The Status LEDs
The POWER LED lights when the WT-4 is on. Signal quality is shown by the
LINK LED: the faster the LED blinks, the better the signal and the faster data
can be transmitted. The ERROR LED blinks to show that an error has
occurred.
Status POWER LINK ERROR
WT-4 off
I (off) I (off) I (off)
Connected to printer; pictures can be
printed
K (on) H (blinks) I (off)
Error connecting to printer
K (on) I (off) H (blinks)
WT-4 hardware or battery malfunction
H (blinks) H (blinks) H (blinks)
$00_WT-4_En.book Page 104 Friday, August 10, 2007 2:02 PM