User Manual

Print Mode / Copying Network Profiles to the Camera

Operating the WT-4 for Computer

Print Mode

Print mode allows you to print JPEG pictures taken with your

camera from a printer connected to a network computer via the

WT-4. The printer normally used with your computer is set as the

printer which will be operated via the WT-4. To configure a

different printer, conduct the following steps (to change the

settings to a different printer, it is not necessary to use a USB cable

to connect the camera to your computer).

The computer’s OS settings will be applied for print quality and

paper type at the time wireless transmission is configured. To

change these settings, conduct step 4 for Macintosh; for Windows,

change the OS printer settings before printing.

Copying Network Profiles to the

Camera

1 Turn the computer on and start the WT-4 Setup Utility.

• Windows: Double-click the [WT-4 Setup Utility] icon on the

desktop

• Macintosh: Click the [WT-4WirelessSetup] icon in the Dock.

$00_WT-4_En.book Page 97 Friday, August 10, 2007 2:02 PM