User's Manual

Advanced Configuration Silex Page 35
Part Number 140-00188-180
Command Description
Example:
Local> show port s1 trigmon
Index # Monitor String
------ --------------
Local> set port s1 trigmon 0 trigger on seeing this string
Local> show port s1 trigmon
Index # Monitor String
------ --------------
0: trigger on seeing this string
SHOW PORT S1 TRIGXMT Shows email or web page strings associated with
TRIGMON index numbers
SET PORT S1 TRIGXMT <index #> <string>
Index # = 0 to 7
Assigns email or web page string to specified
TRIGMON index number
Example:
Local> show port s1 trigxmt
Index # Xmit String
------ ---------------
0: xmit string 0 <<< default msg string
Local> set port s1 trigxmt 0 The trigger string was seen!
Local> show port s1 trigxmt
Index # Xmit String
------ ---------------
0: The trigger string was seen!
Setting up Email Alerts and SNMP Traps
After you have created the GPIO and/or Serial Port alerts and traps, you can the use the Serial Device
Server internal web pages to set up the recipient Email addresses and/or computer systems. After you
have logged into the internal web pages, click Alerts and Traps on the left side of the screen and select
either Email Alerts or SNMP IP Traps. (note that the Alerts and Traps menu item will not appear unless
you have previously configured match strings using the Internal Configuration Console as described in
the previous section). The Email Alert Configuration screen is shown below.