User's Manual

Console Commands Silex Page 57
Part Number 140-00188-180
Server Information Commands
Table 16 Server Information Commands
Command Description Sample Output
SET SERVEr
Description
Sets server description string
Format:
SET SERVEr DEscription <description-string>
SET SERVEr NAme Sets server node name
The default value is TWC_xxxxxx, where xxxxxx are the last 6 hex digits of the
MAC address.
Format:
SET SERVEr NAme <name>
SET SNMP GETCOMM Gets community name
The default value is public.
Format:
SET SNMP GETCOMM <string>
SET SNMP JETADmin Enables or disables JetAdmin compatibility
The default value is enabled.
Format:
SET SNMP JETADmin [ ENable | DIsable]
SET SNMP
SETCOMM1
Sets community 1 name
The default value is internal?
Format:
SET SNMP SETCOMM1 <string>
SET SNMP
SETCOMM2
Sets community 2 name
The default value is Pass.
Format:
SET SNMP SETCOMM2 <string>
SET SNMP CONtact Sets system contact string
The default value is null.
Format:
SET SNMP CONtact <string>
SET SNMP LOCation Sets system location string
The default value is null.
Format:
SET SNMP LOCation <string>
SH SERIAL Displays serial number of the unit
Sample output:
Serial number is 9047595