User's Manual

Page 74 Silex Safety and Regulatory Notices
Part Number 140-00188-180
Declaration of Conformity (FCC) (SX-510)
According to 47CFR, Part 2 and 15 for Class B Personal Computers and Peripherals; and/or CPU Boards
and Power Supplies used with Class B Personal Computers:
We: Silex Technology America, Inc.
Located at: 157 West 7065 South
Salt Lake City, UT 84047, USA
Declare under sole responsibility that the product identified herein, complies with 47CFR Part 2 and 15 of
the FCC rules as a Class B digital device FOR HOME OR OFFICE USE. Each product marketed, is
identical to the representative unit tested and found to be compliant with the standards. Records
maintained continue to reflect the equipment being produced can be expected to be within the variation
accepted, due to quantity production and testing on a statistical basis as required by 47CFR §2.909.
Operation is subject to the following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including interference that may cause
undesired operation.
Trade Name: Silex
Type of Product: Ethernet and Wireless 802.11b/g and 802.11a-enabled serial server
Model: SX-510
Silex Technology America, Inc. hereby declares that the equipment specified above conforms to the
above requirements.
Standards used and met in the assessment:
 EN55022: 1998 Class B; CFR Title 47, Part 15, Subpart B, Subpart C and subpart E
 Medical EMC: IEC 60601-1-2:2001
 Safety: CSA 60950-1, UL 60950-1
 SAR: ANSI/IEEE Std. C95.1-1999, RSS-102
Information for Canadian Users (IC notice) (SX-510)
The term “IC” before the radio certification number only signifies that Industry of Canada technical
specifications were met. Operation is subject to the following two conditions: (1) this device may not
cause interference, and (2) this device must accept any interference, including interference that may
cause undesired operation of the device.
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment
Regulations (RSS-210).
To prevent radio interference to the licensed service, this device is intended to be operated indoors and
away from windows to provide maximum shielding. Additionally, the band 5150-5250 MHz is only for
indoor usage to reduce potential for harmful interference to co-channel mobile satellite systems.
Equipment that is installed outdoors is subject to licensing.
This device has been designed to operate with an internal antenna having a maximum gain of 2 dB in the
2402-2472 MHz band and 3 dB in the 5150-5250 & 5725-5825 MHz bands. Antenna having a higher
gain is strictly prohibited to comply with the equivalent isotropically radiated power (EIRP) limits specified
per regulations of Industry Canada. The required antenna impedance is 50 ohms.
The SX-510 satisfies the RSS-102 rules for Specific Absorption Rate (SAR). The SAR limit set by the IC
is 1.6 W/kg (Watts/kilogram). These limits are part of comprehensive guidelines to establish permitted
levels of Radio Frequency energy for the general public. The highest body SAR value for the SX-510 is
0.41 W/kg. The SX-510 is not intended for placement next to the head and the 20 cm separation rule
should be used.