User's Manual

time)

Dimensions W:71.54mm × D:126.4mm × H:24.2mm

Operating

environment

Temperature : 0°C to +40°C / +41°F to +104°F

Humidity : 20% to 90%RH(Non-condensing)

Storage

environment

Temperature : -10°C to +50°C / +14°F to +122°F

Humidity : 20% to 90%RH(Non-condensing)

EMC VCCI Class B / FCC Class B / ICES Class B

Power supply Operating voltage: 5V

 Silex Technology shall not be liable for any loss or damage of data in data storage devices

resulting from the use of SX-DS-3000WN. Silex Technology shall also not be liable for any leak,

manipulation, loss, or corruption of data in data storage devices connected to SX-DS-3000WN as

a result of improper use.

 Some USB Hubs may not be compatible with SX-DS-3000WN.

 When using isochronous devices such as Web cameras or USB speakers, etc, please connect

them directly to SX-DS-3000WN.

 If isochronous devices such as Web cameras or USB speakers, etc. are used wirelessly with SX-

DS-3000WN, frame dropping or sound skipping may occur.

 If isochronous devices such as Web cameras or USB speakers, etc. are used on a 100BASE-

TX/10BASE-T network, frame dropping or sound skipping may occur.

 Depending on the USB printing device specification, the Printer auto connection function may

not be available.

 When a print server feature is used, it is impossible to get printer status using the status monitor

software that came with the printer or MFP. Also, if the printer supports bi-directional printing

only, a print server feature cannot be used.

 When using a print server feature, only one printer can be used at a time. To connect 2 or more

printers, SX Virtual Link must be used.

 Some USB devices may not be supported depending on the driver specification. For the latest

compatibility information, please visit our website ( http://www.silexamerica.com/).

 For the latest information on the supported operating system, please visit our website

( http://www.silexamerica.com/).

 If an overcurrent is detected on a USB port, power supply to the USB port is automatically cut off

via an overcurrent protection feature. If you are using USB devices that run on USB Bus power, it

is recommended to avoid using two or more devices at once, so that the total power used does

not exceed the maximum power capability of SX-DS-3000WN.

 About USB Hub connection

SX-DS-3000WN does not support the USB devices connected across two or more USB Hubs.

(The cascade connection is not supported.)

ページ

2013/

11/