User's Manual

ManualsBrandsSilex Technology ManualsComputers & AccessoriesWireless E84 Digital Communication Device

Wireless E84 Digital Communication Device（WDCD-3310）User Manual

WDCD-3310 is a device that E84 interlock communication by wireless communication during FOUP transfer

between the OHT（Overhead Hoist Transfer）and semiconductor manufacturing equipment.

The WDCD-3310 is equipped on the semicunductor manufacturing equipment.

Parts and Functions

STATUS LED

Red light on

: Hardware error

Green light on

: Power On

Orange light on

: Setting various parameters of wireless E84

device via tool

Red light on

: Wireless E84 device parameter setting error

via tool

POWER LED

Green light on

: Power On

Green light flashing

: Program changing

Orange light on

: Initializing process

W-E84 LED

Orange light on

: Power On(5.8GHz)

Orange light flashing

: Communicating in the 5.8 GHz band

Red light on

: An error occurred in communication with

the wireless E84 unit

Green light on

: Power On(2.4GHz)

Green light flashing

: Communicating in the 2.4 GHz band

Antenna

connector

5pin connector

micro USB

3pin connector

DIP Switch

12pin connector

10pin connector

Push Switch

POWER

LED

STATUS

LED

W-E84

LED

Summary of content (3 pages)

PAGE 1
Wireless E84 Digital Communication Device（WDCD-3310）User Manual WDCD-3310 is a device that E84 interlock communication by wireless communication during FOUP transfer between the OHT（Overhead Hoist Transfer）and semiconductor manufacturing equipment. The WDCD-3310 is equipped on the semicunductor manufacturing equipment.
PAGE 2
3pin connector Debug port 5pin connector CPU internal ROM writing (only used in the factory) 10pin connector Connect to semicondutor manufacturing equipment 12pin connector Connect to semicondutor manufacturing equipment Micro USB Debug port Antenna connector Connect the antenna Push Switch Used to initialization settings Setup 1.Use a dedicated cable to connect the 10-pin & 12-pin connector to semiconductor manufacturing equipment. 2.
PAGE 3
Supplier's Declaration of Conformity 47 CFR § 2.1077 Compliance Information Unique Identifier: WDCD-3310 Responsible Party – U.S. Contact Information Responsible Party Name: silex technology America, Inc. Responsible Party Address: East Sandpointe, #245 Santa Ana, CA 92707 Phone: 657-218-5199 FCC Compliance Statement This device complies with part 15 of the FCC Rules.