User's Manual

3pin connector
5pin connector
10pin connector
12pin connector
Micro USB
Antenna connector
Push Switch
Setup
2.Powered by semiconductor manufacturing equipment and controls WDCD-3310.
Basic configration
Wireless Frequency Band
Wireless Channel
Wireless Channel Width
Channel Power setting
Channel Period
Receive timeout
Commnication timeout
Pairing threshold level
Specification
Power supply
Wireless I/F
Push Switch
Ch3~Ch80(2.4GHz)
Ch2~Ch100(5.8GHz)
1MHz
Connect the antenna
Used to initialization settings
Debug port
ISM（2.4GHz,5.8GHz）
-20dBm~0dBm(2.4GHz)
-20dBm~+2dBm(5.8GHz)
10,20,30,40,50ms
100~60000ms
100~5000ms
-80~-24dBm、No threshold
Debug port
CPU internal ROM writing (only used in the factory)
Connect to semicondutor manufacturing equipment
1.Use a dedicated cable to connect the 10-pin & 12-pin connector to semiconductor manufacturing
equipment.
Connect to semicondutor manufacturing equipment
0~+40℃
Humidity
20~80%RH(Non condensing)
Strorage environment
Temperature
-10~+50℃
Humidity
20~90%RH(Non condensing)
Operating environment
Temperature
DC24V
short-range wireless(2.4GHz/5.8GHz)
initializaition swtich ×1
LED
POWER LED
Green/Red/Orange
STATUS LED
Green/Red/Orange
W-E84 LED
Green/Red/Orange