Datasheet

15
The SILEX adapters connect each Ethernet-capable device using
802.11b/g standard to wireless networks, without requiring
changes to the driver and existing management software.
The SX-2600CV connects IPv4 devices easily and without high costs
in IPv6 networks.
Interface: · IEEE 802.11b/g
· 10BASE-T/100BASE-TX (Auto-detection)
· SX-600-1003: additional serial port (RS-232)
Security: WEP; SSID, WPA-PSK (TKIP/AES), WPA2-PSK (AES)
· SX-600-1003: additional enterprise modus,
PAP and MS-CHAPv2; 802.1x EAP with TLS/TTLS/
LEAP/PEAP/FAST
· Web browser, AdminManager
· SX-600-1003: additional ExtendView, telnet,
and access via serial port
Features:
· No drivers needed - works with any Ethernet-enabled device
· No extra software required
· Ethernet pass-through means any security already provided by
your Ethernet enabled device
·
work with any operating system and any network device
Range of Models:
SX-2500CG
SX-600-1003 Wireless Ethernet Adapter – Enterprise
Interfaces: 2 x Ethernet interface 10BASE-T/
100BASE-TX (Auto-detection)
Web browser (supporting bulk
Features:
· Can be used in environments that use both IPv6 and IPv4
· Bridges protocols other than IPv6 and IPv4
The SX-2600CV
IPv6-IPv4 Converter
SX-600-1003 – Enterprise
Wireless Ethernet Adapter
Ethernet Converters
The Ethernet converter connects IPv4 devices easily into IPv6
operating costs. The high-performance wireless Ethernet
adapter connects all Ethernet-capable devices into wireless
network environments. This allows the freedom to place end
devices anywhere and to use them wireless.
SX-600-1003
Extremely secure
SX-2500CG
Extremely simple
MSRP
€ 169,-
ex VAT
MSRP
€ 99,-
ex VAT
MSRP
€ 179,-
ex VAT
Both IPv4 and IPv6 are used in the network.
IPv4 Network Device