Owner`s manual

INSTALLATION INSTRUCTIONS
4) MOUNTING THE DECORATIVE FLUE (REQUIRES 2 PEOPLE)
Before you mount the decorative fl ue to the range hood, fasten the exhaust tubing to
the blower housing and make sure all ducting is correct (see Fig. 7.) Have a qualifi ed
electrician connect the power supply (see Fig. 8.) Next, fasten the decorative fl ue onto
the range hood. DO NOT SEPARATE THE EXTENSION FLUE! Have one person hold
the fl ue and the other person align the holes on the decorative fl ue with the holes on
the range hood brackets. Fasten the 2 screws on each side (see Fig. 9.)
CEILING
FIG. 7
Blower
Housing
Exhaust
tubing/duct
STEP.1
Align holes
STEP.2
Tighten screw
on each side
Flu
Rangehood
WALL
FINAL
Flu
Rangehood
WALL
FIG. 9 - Side of unit
C
6
Connect house power cable to range hood wiring,
Ground Wire: GREEN
Fire Wire : BLACK
Zero Line : WHITE
/
1
WALL
ELECTRICAL
ACCESS
FIG. 8 - Wiring diagram