User's Manual

Alternate LOCATION
Functionality 0 - 3 4 - 7 8 - 11 12 - 15 16 - 19 20 - 23 24 - 27 28 - 31 Description
DBG_SWO
0: PF2
1: PB13
2: PD15
3: PC11
Debug-interface
Serial Wire viewer
Output.
Note that this func-
tion is not enabled
after reset, and
must be enabled by
software to be
used.
DBG_TDI
0: PF3
Debug-interface
JTAG Test Data In.
Note that this func-
tion is enabled to
pin out of reset,
and has a built-in
pull up.
DBG_TDO
0: PF2
Debug-interface
JTAG Test Data
Out.
Note that this func-
tion is enabled to
pin out of reset.
FRC_DCLK
0: PA0
1: PA1
6: PB11
7: PB12
8: PB13 15: PC10 16: PC11
21: PD13
22: PD14
23: PD15
24: PF0
25: PF1
26: PF2
27: PF3
Frame Controller,
Data Sniffer Clock.
FRC_DFRAME
4: PB11
5: PB12
6: PB13
13: PC10
14: PC11
19: PD13
20: PD14
21: PD15
22: PF0
23: PF1
24: PF2
25: PF3
30: PA0
31: PA1
Frame Controller,
Data Sniffer Frame
active
FRC_DOUT 0: PA1
5: PB11
6: PB12
7: PB13
14: PC10
15: PC11
20: PD13
21: PD14
22: PD15
23: PF0
24: PF1
25: PF2
26: PF3
31: PA0
Frame Controller,
Data Sniffer Out-
put.
GPIO_EM4WU0
0: PF2
Pin can be used to
wake the system
up from EM4
GPIO_EM4WU1
Pin can be used to
wake the system
up from EM4
GPIO_EM4WU4
0: PD14
Pin can be used to
wake the system
up from EM4
GPIO_EM4WU8
Pin can be used to
wake the system
up from EM4
BGM113 Blue Gecko Bluetooth
®
Smart Module Data Sheet
Pin Definitions
silabs.com | Smart. Connected. Energy-friendly. Preliminary Rev. 0.93 | 47