User's Manual

Bluegiga Technologies Oy
Page 43 of 52
17 Software
BT111 is supplied with an on-chip Bluetooth v4.0 specification qualified HCI Controller stack firmware. It also
has an EEPROM chip, which allows modifications of many configuration parameters (PS-keys) of the
Bluetooth chip.
When the BT111 development kit is plugged into your PC, it will show up as a generic Bluetooth Controller,
and the Bluetooth Host stack installed on your PC will take control of it.
To access BT111’s configuration parameters, which are stored on its EEPROM chip, you need the included
SPI connector and PSTool software from the CSR BlueSuite tool collection. BlueSuite is available on the
Bluegiga Techforum at http://techforum.bluegiga.com
.
PSTool contains a full list of the parameters that are possible to modify, along with their descriptions. Some
common parameter keys are:
- (0x0108) PSKEY_DEVICE_NAME – Bluetooth name of the device
- (0x02be) PSKEY_USB_VENDOR_ID – USB Vendor ID, if you have your own VID and wish to use it
(Default is 0a12 which is CSR’s VID)
- (0x02bf) PSKEY_USB_PRODUCT_ID – USB Product ID (Default is 0)
Please see the quick start guide for more information and examples.