User's Manual
Table Of Contents
- 1. Key Features
- 2. Pinout
- 3. Interfaces
- 4. Module Software
- 5. Hardware Design Guidelines
- 6. Electrical Characteristics
- 7. RF Characteristics
- 8. Physical Dimensions and PCB Land Pattern
- 9. Soldering Recommendations
- 10. Tape and Reel Packaging
- 11. Certifications
- 12. Ordering Information
- 13. Support
- 14. Revision History
- Table of Contents
Table 7.5. Qualified Antenna Types for WGM110E
Qualified Antenna Types for WGM110E
Antenna type Maximum Gain
Dipole 2.14 dBi
Any antenna that is of the same type and of equal or less directional gain as listed in the above table can be used without a need for
retesting. To reduce potential radio interference to other users, the antenna type and its gain should be selected so that the equivalent
isotropically radiated power (e.i.r.p.) is not more than that permitted for successful communication. Using an antenna of a different type
or gain more than 2.14 dBi will require additional testing for FCC, CE and IC certification.
Note: Use of antennas not complying to the type and maximum gain requirements set in this section will require the user to perform
additional testing for FCC, CE and IC certifications.
WGM110 Wizard Gecko Wi-Fi
®
Module Data Sheet
RF Characteristics
silabs.com | Smart. Connected. Energy-friendly. Rev. 1.2 | 25