User Manual
Table Of Contents
- Access Server
- Table of Contents
- List of Tables
- Chapter 1. Introduction to Access Server
- Chapter 2. Getting Started with Access Server
- Chapter 3. Using the System
- 3.1. Network Interfaces
- 3.2. Bluetooth
- 3.3. Compact Flash Cards
- 3.4. USB Memory Dongles and Compact Flash Memory Cards
- 3.5. Servers
- 3.5.1. Finder
- 3.5.2. ObexSender
- 3.5.3. SMS Gateway Server
- 3.5.4. User Level Watchdog
- 3.5.5. Remote Management
- 3.5.5.1. Overview
- 3.5.5.2. Management Packet Format
- 3.5.5.3. Management Packet Information File Format
- 3.5.5.4. Management Operation Example: Hello World
- 3.5.5.5. Management Operation Example: Software Update
- 3.5.5.6. Management Operation Example: IPQUERY
- 3.5.5.7. Management with USB Memory Dongle or Compact Flash Memory Card
- 3.5.6. FTP
- 3.5.7. Web Server
- 3.5.8. SNMP
- 3.5.9. OpenVPN
- 3.5.10. SSH
- 3.5.11. Telnet
- 3.5.12. NTP
- 3.6. Utilities
- 3.7. Real Time Clock
- 3.8. Time Zone
- 3.9. System ReInstall and Upgrade
- Chapter 4. SPPoverIP
- Chapter 5. Obexsender
- Chapter 6. Software Development Kit
- 6.1. Introduction to SDK
- 6.2. Installing SDK
- 6.3. Creating Applications
- Chapter 7. iWRAP Bluetooth Interface
- 7.1. Terms
- 7.2. Starting the iWRAP Servers
- 7.3. Writing iWRAP Applications
- 7.4. Commands Controlling iWRAP
- INFO
- QUIT
- SET
- SAVE
- LOAD
- PING
- PONG
- ECHO
- LOCK
- UNLOCK
- SHUTDOWN
- SLEEP
- 7.5. Finding Bluetooth Devices
- INQUIRY
- NAME
- 7.6. Making a Bluetooth Connection
- CALL
- CONNECT
- NO CARRIER
- RING
- RINGING
- CLOSE
- LIST
- STATUS
- 7.7. Service Discovery
- SDPSEARCH
- SDPATTR
- SDPQUERY
- SDP bdaddr
- SDP ADD
- SDP DEL
- SDP LIST
- 7.8. Example Sessions
- 7.9. Error Codes
- Chapter 8. I/O API
- Chapter 9. Advanced Use Cases for Access Server
- Chapter 10. Certification Information and WEEE Compliance
- Appendix A. Directory Structure
- Appendix B. Setup Options
- Appendix C. Open Source Software Licenses
- Appendix D. Supported Hardware
Appendix B. Setup Options
9. Allow anonymous user to download [Yes]
Whether "anonymous" user is allowed to download files or not.
10. Allow anonymous user to upload [No]
Whether "anonymous" user is allowed to upload files and make directories
or not.
11. Allow anonymous user to overwrite [No]
Whether "anonymous" user is allowed to overwrite existing files or not.
12. Allow anonymous user to multiple login [No]
Whether "anonymous" user is allowed to multiple logins or not.
13. Allow anonymous user to erase [No]
Whether "anonymous" user is allowed to erase files and directories or not.
14. Edit configuration file [/etc/ftpd.conf]
Edit the self documented configuration file of the FTP server. Here you
can change more advanced settings.
B.4.3. ObexSender settings
Submenu containing settings for ObexSender application.
1. Bluetooth friendly name [W$S_$p]
The name shown when this device is found when inquired about by other
Bluetooth devices. Following meta tags are available:
$S : Hardware serial number, all ten digits
$s : Hardware serial number, last three digits
$P : Server port
$p : Server port, last digit
$H : Fully Qualified Domain Name (FQDN)
$h : hostname
$$ : $
For example, "Server_$p" would set the Bluetooth friendly name as
"Server_1" for 1st baseband, "Server_2" for 2nd baseband and
"Server_3" for 3rd baseband.
2. Delay between inquiries [10]
Delay between inquiries (Bluetooth device discoveries) in seconds.
3. Delay between reply scans [10]
Determines how often (in seconds) OBEX incoming directory (/tmp/obex)
is scanned for remote requests. A low value increases CPU usage.
4. If previous was ok, timeout before sending again [36000]
If a file has been successfully sent to a device, this timeout
(in seconds) defines when content can be sent again to the same device.
5. If previous was reject, timeout before trying again [86400]
If a file transmission to a device has failed or user has declined
143