User Manual

Appendix B. Setup Options
First IP address of the lease block.
7. Last IP for lease block [192.168.161.254]
Last IP address of the lease block.
8. Subnet of lease block [255.255.255.0]
Subnet mask of the lease block.
9. Lease time [86400]
Lease time in seconds.
B.5.1.4. PAN network access point profile settings
Submenu containing Personal Area Network Network Access Point Profile
settings.
1. Service name (shown in SDP) [Network Access]
The name of the Bluetooth PAN Network Access Point Profile service
shown in the Service Discovery.
B.5.1.5. Serial port profile settings
Submenu containing the Bluetooth Serial Port Profile settings.
The profile itself is enabled and disabled by switching "serialport"
application "on" or "off" from the menu:
Setup -> Applications -> Default bootup applications.
1. Act as the calling device [No]
Whether this device should act as the calling device (DevA) or the answering
device (DevB).
2. BPS rate [115200]
The bits-per-second rate of the connection. Possible values are:
300, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400, and 460800.
3. Data bits [8]
The number of data bits in the connection. Possible values are:
5, 6, 7, and 8.
4. Parity [0]
The parity bit setting of the connection. Possible values are:
0: No Parity (default)
1: Odd Parity
2: Even Parity
5. Stop bits [1]
The number of stop bits in the connection. Possible values are 1 and 2.
6. Hardware flow control (RTS/CTS) [Yes]
Whether or not the hardware flow control is used.
7. Software flow control (XON/XOFF) [No]
Whether or not the software flow control is used.
150