User Manual

Appendix B. Setup Options
Edit the file containing the default user profile settings.
3. WWW passwords [/etc/httpd.conf]
Access to WWW pages served by Access Server can be restricted using the
configuration file "httpd.conf", editable from here.
The file consists of lines in format "/dir:username:password". This
specifies that to view the WWW page at address "http://as-ip/dir", you
must enter username "username" and password "password".
More than one username can be defined for the same "/dir"
by adding multiple lines.
By default, this file specifies that only user "root" with password
"buffy" is allowed to access the WWW Setup.
4. Setup access [/etc/setup.conf]
The "/etc/setup.conf" file can be used to give different access rights to
different users of the WWW Setup.
The file consist of lines in following format:
example.tag +user1 +user2 -user3 -user4
This will allow (+) access to tag "example.tag" for "user1" and "user2"
and denies (-) access from "user3" and "user4". You can find the tags
from the output of
Setup -> Advanced -> System Information -> Collect info for support request
For example, the tag of this setting is advanced.setupconf. If you
have created another user "guest" in /etc/httpd.conf that can access
"/setup", you can deny that user from changing the Setup access settings
with following line in this file:
advanced.setupconf -guest
5. Edit other configuration files []
From this menu you can edit any files located in Access Server file system.
You can for example create "/var/spool/cron/crontabs/root" file for
configuring the cron daemon.
6. Browse files []
Browse files stored in Access Server.
7. Find other Access Servers [/usr/sbin/finder]
Find other Access Servers.
8. Inquiry for Bluetooth devices [/usr/bin/btcli inquiry]
Inquiry for other Bluetooth devices.
9. Upload a software update [/tmp/obex]
Upload a software update file (
*
.wpk).
Access Server supports a special management packet format (wpk), which
152