User's Manual

26
Certifications
WT11 is compliant to the following specifications
10.2 Bluetooth
The WT11-E module is Bluetooth qualified and listed as an end product. If not modified in
any way, it is a complete Bluetooth entity, containing software and hardware functionality
as well as the whole RF-part including the antenna. This practically translates to that if the
module is used without modification of any kind, it does not need any Bluetooth approval
work. If changes are made in the parameter set, added profiles or in the antenna design,
it is required to be submitted to a BQB (Bluetooth Qualification Body) for evaluation on
what needs to be tested.
With HCI firmware WT11 will not meet the requirements of end product qualification.
WT11 is Bluetooth compliant to the following specifications
1. RF as defined in Part A of the Bluetooth specification v2.0+EDR, Vol.2 Core System
Package [Controller volume] (Class 1 operation) with all optional and mandatory
features supported.
2. BB as defined in Part B of the Bluetooth specification v2.0+EDR, Vol.2 Core System
Package [Controller volume], and specified in the covered functionality of the
Software Integrated Component (Bluetooth ID: B01294)
3. LM as defined in Part C of the Bluetooth specification v2.0+EDR, Vol.2 Core System
Package [Controller volume], and specified in the covered functionality of the
Software Integrated Component (Bluetooth ID: B01294)
4. L2CAP as defined in Part A of the Bluetooth specification v2.0+EDR, Vol.3 Core
System Package [Controller volume], and specified in the covered functionality of
the Software Integrated Component (Bluetooth ID: B00477)
5. SDP as defined in Part B of the Bluetooth specification v2.0+EDR, Vol.3 Core
System Package [Controller volume], and specified in the covered functionality of
the Software Integrated Component (Bluetooth ID: B00477)
6. RFCOMM as defined in PART F:1 of the Bluetooth Core Specification v1.1 and
specified in the covered functionality of the Software Integrated Component
(Bluetooth ID: B00047).
7. Generic Access GAP as defined in PART C of the Bluetooth Core Specification
v2.0+EDR, Vol.3 Core Systems Package [Host Volume], and specified in the
covered functionality of the Software Integrated Component (Bluetooth ID:
B00047).
8. Serial Port Profile (SPP) as defined in PART K:5 of the Bluetooth Profile Specification
v1.1, and specified in the covered functionality of the Software Integrated
Component (Bluetooth ID: B00047).
Bluetooth identifier: B03005