User's Manual

Ethernet-DK
Rev. 0.6 7
5. Software Setup
The included CD-ROM contains the Silicon Laboratories IDE, Keil C51 toolset, and documentation including
datasheets, application notes, and an electronic version of this user’s guide. The instructions below describe how
to install the Embedded Ethernet Development Kit software. Refer to the readme.txt file on the CD-ROM for the
IDE release notes containing the latest information regarding supported devices, revision history, and known
issues.
1. Place the Embedded Ethernet Development Kit CD-ROM into the PC’s CD-ROM drive. An installer will
automatically launch, allowing you to install the IDE software or read documentation by clicking buttons on
the Installation Panel. If the installer does not automatically start when you insert the CD-ROM, run
autorun.exe, found in the root directory of the CD-ROM.
2. After the installation dialogue box appears, click the Install Development Tools button.
3. Select the ETHERNET-DK entry and press the Install button.